HomeProductsDistributorsOperating InstructionsGalleryVideo
 

Bitzenburger Jigs

Bitzenburger jigs have set the industry standard for fletching tools for over 50 years. It is today's only true precision fletching instrument used by every major manufacturer of quality arrows around the world. Unparalleled quality along with simplicity, design and precision sets this fletching tool in a class by itself. Designed by experienced archers for the perfectionist who wants the finest fletcher in the world for perfect arrow making.

  • Constructed of die cast alloy, this self-supporting fletching tool features a strong permanent magnet which allows for very precise and uniform placement of all feather and vanes.
  • Self-centering shaft cradle will accept and center any size shaft available today.
  • Large dials at the top and bottom of the magnet holder make it easy to adjust your angle of fletching within seconds, to fletch straight, offset or true right or left helical.
  • Feather spacing of 3 fletch 120 degrees, 4 fletch 75 degrees x 105 degrees, and 4 fletch 90 degrees can be selected by a slight screw adjustment. Optional nock receivers available to achieve 60 degrees x 120 degrees 4 fletch or 120 degrees 3 fletch cock vane down or up.
  • The clamp is help at a 45 degrees angle so the arrow maker will have a clear view of the fletching at all times.
  • All metal parts.
  • Comes complete with wrenches and instruction sheet.

Cat. #1000 Straight Jig & Clamp: includes standard nock receiver and straight clamp; used for straight, and right or left offset fletching. (Recommended for target shooters)

Cat #1002 Right Helical Jig & Clamp: includes right nock receiver and right helical clamp. (Recommended for compound shooters and overdraws)

Cat #1004 Left Helical Jig & Clamp: includes left nock receiver and left helical clamp. (Recommended for compound shooters)

Cat #1006 Straight Jig & R.H. Clamp: includes standard nock receiver and right helical clamp. (Preferred by the traditional shooter)

Cat #1007 Straight Jig & L.H. Clamp: includes standard nock receiver and left helical clamp. (Preferred by the traditional shooter)

 

Bitzenburger Crossbow Bolt Fletching Jig

Designed for fletching crossbow bolts, this jig features a nock receiver that accepts all 22/64 diameter shafts with most end caps and is indexed at 120 degrees for 3 fletch spacing. Includes straight clamp for straight or offset fletching.

Cat #1020 Crowbow Jig & Clamp: includes crossbow receiver and straight clamp.

Bitzenburger Precision Die Cast Clamps

Bitzenburger precision die cast clamps are available in three different models. Straight clamps for offset as well as straight fletching, right clamps for true right helical fletching and left clamps for true left helical fletching.

  • Each clamp is precision ground to assure identical blade matching. Right and Left helical clamps are ground with a radius to achieve a true helical fletch.
  • Hollow recess allows for thumb and fingertip control preventing slippage in the hand.
  • Graduated scale at the rear of the base of the clamp to allow for consistent spacing of feathers and vanes accurately from the nock.
  • Knife edge on base of clamps eliminates build up of surplus glue.

Cat #2000 Straight Clamp

Cat #2002 Right Helical Clamp

Cat # 2004 Left Helical Clamp

Note: The steel plate is cased into the straight clamp, unlike the right and left helical where it is glued on.

Bitzenburger Nock Receivers

Bitzenburger interchangeable nock receivers are precisely indexed for 120 degrees 3 fletch, 90 degrees 4 fletch, 75 degrees x 105 degrees 4 fletch and 60 degrees x 120 degrees 4 fletch. Many models are available to match your fletching and shooting style. Nock receivers fit all Dial-O-Fletch jig frames.

Nock Receivers Available With Jig

Cat #3000 Straight (or standard) Nock Receiver
Indexed at 120 degrees, 90 degrees and 75 degrees x 105 degrees
Recommended use: Straight Clamp

Cat #3002 Right Nock Receiver
Indexed at 120 degrees, 90 degrees and 75 degrees x 105 degrees
Recommended use: Right Wing Clamp

Cat #3004 Left Nock Receiver
Indexed at 120 degrees, 90 degrees and 75 degrees x 105 degrees
Recommended use: Left Wing Clamp

Optional Nock Receivers

Cat #3006 TMStraight Nock Receiver
Indexed at 120 degrees for cock fletch up or down
Recommended use: Straight Clamp

Cat #3008 TMRight Nock Receiver
Indexed at 120 degrees for cock fletch up or down
Recommended use: Right Helical Clamp

Cat #3010 TMLeft Nock Receiver
Indexed at 120 degrees for cock fletch up or down
Recommended use: Left Helical Clamp

Cat #3012 60 x 120 Nock Receiver
Indexed at 60 degrees x 120 degrees 4 fletch (for maximum fletching clearance)
Recommended use: Any Clamp

Cat #3020 Crossbow Nock Receiver
Indexed at 120 degrees for 3 fletch spacing
Recommended use: Straight Clamp

Content Copyright 2010 All rights reserved
Site Designed by: Sheffer Design